1. Release version and download file name ========================================== The newly released program version and download file name are as follows. PCL: If Universal Print Driver is installed in PC with older than v2.0.2.0, the following message is displayed and this version (PCL/PCL5: v3.2.2.0) cannot be installed. "The printer driver is not a target for update. Please try again after updating to Version 2.0.2.0." Please be sure to install this version (PCL/PCL5: v3.2.2.0) after updating the version to v2.0.2.0. It is not possible to update under the environment where Installer is not available. It is not possible to update via Special Universal Print Driver. [Release version] Program Name Current Ver. New Ver. Language KONICA MINOLTA Universal PCL 3.2.1.0 3.2.2.0 JA/EN/FR/IT/DE/ES/KO/ZH-CN/ZH-TW/PT/NL/DA/FI/NO/SV/CS/HU/PL/SK/SL/RO/RU/EL/TR/CA/EU KONICA MINOLTA Universal PCL5 3.2.1.0 3.2.2.0 JA/EN/FR/IT/DE/ES/KO/ZH-CN/ZH-TW/PT/NL/DA/FI/NO/SV/CS/HU/PL/SK/SL/RO/RU/EL/TR/CA/EU Install Type exe type Model Note Baseline *1 PCL/PCL5 KONICA MINOLTA A3 common PCL/PCL5 KONICA MINOLTA mc8650 PCL/PCL5 KONICA MINOLTA C450/C450P/C351 PCL/PCL5 KONICA MINOLTA C250/C250P PCL/PCL5 KONICA MINOLTA C252/C252P PCL/PCL5 KONICA MINOLTA C352/C352P/C300 PCL/PCL5 KONICA MINOLTA 750/600 PCL/PCL5 KONICA MINOLTA 500/420/360 PCL/PCL5 KONICA MINOLTA C200/C210 PCL/PCL5 KONICA MINOLTA A4 common PCL/PCL5 KONICA MINOLTA C30P/C31P PCL/PCL5 KONICA MINOLTA C20 PCL/PCL5 KONICA MINOLTA C20P PCL/PCL5 KONICA MINOLTA 40P PCL/PCL5 KONICA MINOLTA mc5550/mc5570 PCL/PCL5 KONICA MINOLTA mc5650/mc5670 PCL/PCL5 KONICA MINOLTA mc4650 PCL/PCL5 KONICA MINOLTA mc4695MF PCL/PCL5 KONICA MINOLTA pp4650/pp5650 PCL/PCL5 KONICA MINOLTA mc5450 PCL/PCL5 KONICA MINOLTA 501/421/361 PCL/PCL5 KONICA MINOLTA 751/601 PCL/PCL5 KONICA MINOLTA 362/282/222 PCL/PCL5 KONICA MINOLTA C652(DS)/C552(DS)/C452 PCL/PCL5 KONICA MINOLTA C360/C280/C220 PCL/PCL5 KONICA MINOLTA C35/C25/C35P/mc4750 PCL/PCL5 KONICA MINOLTA 751/601 PCL/PCL5 KONICA MINOLTA 423/363/283/223 PCL/PCL5 KONICA MINOLTA 652/602/552/502 PCL/PCL5 KONICA MINOLTA 20 PCL/PCL5 KONICA MINOLTA 20P PCL/PCL5 KONICA MINOLTA 42/36(EU/JP) PCL/PCL5 KONICA MINOLTA 42/36 PCL/PCL5 KONICA MINOLTA C754(e)/C654(e) PCL/PCL5 KONICA MINOLTA 195/215/235 PCL/PCL5 KONICA MINOLTA C554(e)/C454(e)/C364(e)/C284(e)/C224(e) PCL/PCL5 KONICA MINOLTA 754(e)/654(e) PCL/PCL5 KONICA MINOLTA 4700P/4000P/3300P/3301P PCL/PCL5 KONICA MINOLTA 554e/454e/364e/284e/224e PCL/PCL5 KONICA MINOLTA C3850/C3350/C3850FS PCL/PCL5 KONICA MINOLTA 4020/3320 PCL/PCL5 KONICA MINOLTA 4750/4050 PCL/PCL5 KONICA MINOLTA 25e PCL/PCL5 KONICA MINOLTA C3100P PCL/PCL5 KONICA MINOLTA C3110 PCL/PCL5 KONICA MINOLTA C281/C221/C221s PCL/PCL5 KONICA MINOLTA 367/287/227 PCL/PCL5 KONICA MINOLTA C368/C308/C258 PCL/PCL5 KONICA MINOLTA C287/C227 PCL/PCL5 KONICA MINOLTA 958/808/758 PCL/PCL5 KONICA MINOLTA C658/C558/C458 PCL/PCL5 KONICA MINOLTA C650/C550/C451 PCL/PCL5 KONICA MINOLTA C353/C353P/C253/C203 PCL/PCL5 KONICA MINOLTA 350/250/200 PCL/PCL5 KONICA MINOLTA 368/308 PCL/PCL5 KONICA MINOLTA 558/458 PCL/PCL5 KONICA MINOLTA C266/C226 PCL/PCL5 KONICA MINOLTA C3851/C3351/C3851FS PCL/PCL5 *1 Baseline: Models that are not listed in the target model table above. [Download file name] KM_UniversalDriver_PCL_3.2.2.0.zip KM_UniversalDriver_PCL5_3.2.2.0.zip UPD_WhitePaper_v3.2.2_EN_20170124.doc PRI_DLBT1700571EN_0.doc [Supported OS] OS WHQL Windows Vista Home Basic* Yes Windows Vista Home Premium* Yes Windows Vista Ultimate* Yes Windows Vista Business* Yes Windows Vista Enterprise* Yes Windows Server 2008 Standard* Yes Windows Server 2008 Enterprise* Yes Windows Server 2008 R2 Standard Yes Windows Server 2008 R2 Enterprise Yes Windows 7 Home Basic* Yes Windows 7 Home Premium* Yes Windows 7 Professional* Yes Windows 7 Enterprise* Yes Windows 7 Ultimate* Yes Windows 8.1 * Yes Windows 8.1 Pro* Yes Windows Server 2012 Standard Yes Windows Server 2012 Datacenter Yes Windows Server 2012 Essentials Yes Windows Server 2012 R2 Standard Yes Windows Server 2012 R2 Datacenter Yes Windows Server 2012 R2 Essentials Yes Windows 10 * Yes Windows 10 Pro* Yes Windows 10 Enterprise* Yes Windows 10 Education* Yes * Both 32bit (x86), 64bit (x64) Support the following operation environments. - Windows Server 2008 R2 / 2012 / 2012 R2 Cluster Server Service - Citrix XenApp 6.5/7.5/7.6/7.7 - Citrix XenDesktop 7.6/7.7 - Terminal Services - Remote Desktop - Terminal Services Easy Print - Remote Desktop Easy Print 2. What changed ================ 2-1. The following issues are modified in this version. 1. If a paper tray is changed using Word menu, the preset paper tray is changed automatically. Due to the setting change for the paper tray of 4700P, the tray preset for another printers is changed automatically. 2. With 4700P/4000P/3300P/3301P, if a specific PDF file is printed using Universal Driver, the size of spool data becomes large and therefore printing takes time. 3. If two PCL6 drivers are registered on the same PC, the settings for each driver are not maintained. 3. Restrictions ================ 1. When you perform printing using the application, if you click while the print queue status is in the process of connecting, an Error message is displayed. Countermeasure: Click the after the print queue status is ready. 2. When you perform printing using the application (MSPaint.exe), if you click of the print queue whose Device Information has not been acquired, an Error message is displayed. Countermeasure: Perform printing using the application after acquiring the Device Information from . 3. The Universal Print Driver does not work normally if EasyPrint setting in MS Terminal Services Environment is disabled. Countermeasure: Enable EasyPrint setting. 4. Important notice peculiar to PCL5 driver 4-1) If "Enable advanced printing features" is enabled, Poster setting is not reflected on the printed result because Poster function is disabled internally. 4-2) If Overlay is used in Point and Print environment, the following functions are not able to be used at the same time. (The following functions become disabled.) N-up, Poster Printing, Booklet, Zoom, Binding Margin Shift, Image Shift, Watermark 4-3) If N-up and Booklet are configured at the same time, a part of the printed image is cut (the image is printed on a slant). 5. Important notice peculiar to PCL6 driver 5-1) If two PCL6 driver queues are registered on the same PC, the settings for each driver are not maintained. 6. Important Notice for printing in Citrix environment If printing does not operate normally in Citrix environment, it may be improved by either of the following procedures. - By enabling "Enable advanced printing features" against the print queue connected to Client PC and VDA. - By disabling "Enable advanced printing features" against the print queue of Client PC and enabling "Enable advanced printing features" against the print queue connected to VDA. 4. Important Notice ==================== 1. The reproduction of bizhub20/20P picture is prohibited. 5. How to install/ uninstall program ====================================== PCL: If Universal Print Driver is installed in PC with older than v2.0.2.0, the following message is displayed and this version (PCL/PCL5: 3.2.2.0) cannot be installed. "The printer driver is not a target for update. Please try again after updating to Version 2.0.2.0." Please be sure to install this version (PCL/PCL5: 3.2.2.0) after updating the version to v2.0.2.0. It is not possible to update under the environment where Installer is not available. It is not possible to update via Special Universal Print Driver. To install the Universal Print Driver of this version and let it coexist with the UPDs of previous versions that has been installed without affecting these, select "KONICA MINOLTA Universal PCL/PCL5 v3.x" for a driver name at the time of installation. 5.1 How to install a) When using Installer, If your PC is 32-bit environment, please use "UPDSetup.exe". If your PC is 62-bit environment, please use "UPDSetup64.exe". And follow the onscreen wizard to do installation. * In the following environment, cannot use the Installer. Please refer to c) or d). - Microsoft Cluster Server - Citrix XenApp 6.5/7.5/7.6/7.7 - Citrix XenDesktop 7.6 FP2/7.7 - Terminal Service (On 2008R2, Remote Desktop Services) b) When install manually Please perform installation using Add Printer Wizard in Windows. 5.2 How to un-install Universal Print Driver a) When uninstall using Uninstaller Please start up "Uninstaller" from any of the following and follow the instructions of dialogue box to uninstall the driver. - "Start" menu> "All Programs">"KONICA MINOLTA">"Universal PCL/PCL5" - "Control Panel"> "Add or Remove Programs"> "Remove" button of "KONICA MINOLTA Universal PCL/PCL5" b) When uninstall manually If uninstall the driver completely, please perform the following procedure. When uninstalling UPD, if the folders or files are hidden, please change the setting to indicate the files and folders. 1. Delete the printer icon. (for all OS) - From [Printers (and Faxes)] folder, right click [KONICA MINOLTA Universal PCL/PCL5] icon and select [Delete]. - If you registered the printer icon from [Add this Printer to my Printers folder] of Device Selector, please delete all registered printer icons. - After deleting all icons related to Universal Print Driver, go to [file] - [Server Properties] - [Drivers] tab and Remove [KONICA MINOLTA Universal PCL/PCL5]. 2. Delete entries from the Registry. (for all OS) - [Start] button - [Run...] - input "regedit" - [OK], and start the [Registry Editor]. - Please delete all the following keys and each sub-key by the Registry Editor. (Differ in PCL and PCL5.) (The existing registry key depends on the version of installed UPD.) HKEY_CURRENT_USER\Software\KONICA MINOLTA\KONICA MINOLTA Universal PCL or HKEY_CURRENT_USER\Software\KONICA MINOLTA\KONICA MINOLTA Universal PCL v3.x HKEY_CURRENT_USER\Software\KONICA MINOLTA\KONICA MINOLTA Universal PCL5 or HKEY_CURRENT_USER\Software\KONICA MINOLTA\KONICA MINOLTA Universal PCL5 v3.x 6. How to check version information =================================== 1. Open "Printers and Faxes". 2. Select "KONICAMINOLTA Universal PCL/PCL5". 3. Right click on the icon and select "Properties". 4. Click "Details" button. 5. Click "Option" button. 6. Click "Version Information". * Company names and product names in this document are the registered trademarks for respective companies. Copyright(C) 2016 KONICA MINOLTA, INC.